AUTOMOTIVE BRAKE PRESSURE TRANSDUCER

Real-time monitoring of the brake system pressure in the store jar, when the pressure in the gas tank is insufficient, the pressure sensor to ABS system to provide accurate feedback of pressure signal to ECU, timely discover and eliminate the brake potential hazard. High measuring accuracy, enables the ABS on the braking system to realize accurate control; Good reliability and long service life and suitable to work under the bad environment in the car system.

Specification

• Pressure range: 0~1.47 MPa (range is adjustable)
• Accuracy: ±1.0% F.S.(Linearity, Hysteresis, Repeatability, Calibration)
• Total error band:±2.0% F.S.(-40℃~+85℃)
• Operating temperature:-40℃~+85℃
• Storage temperature:-40℃~+150℃
• Protect pressure: 1.5Mpa 2.3Mpa
• Burst pressure: 2.0Mpa 3.0Mpa
• Operating medium: Compressed air
• Air Life cycle: 3 million cycles
• Vibrating:11g(50~2000Hz)
• Ingress Protection:IP65
• Supply voltage:5.0±0.25VDC
• Output voltage: 0.5~4.5VDC (Can be adjusted within 5vDC)
• Supply current: 10mA (Maximum)
• Loat impedance: 10KQ(Typical)
• Output response time:3ms
• overvoltage protection: 16VDC
• Reverse voltage protection: -14VDC
• short-circuit protection: Yes
• EMC withstand(1MHz—400MHz):100v/m
• ESD withstand:15KV